



























LSX B1 Wall Bracket
Wall mount bracket for LSX
The B1 wall bracket enables the LSX to be affixed to the wall with minimum fuss and maximum flexibility. Using the integrated mounting system and adjustable dais, LSX can be angled sideways and downwards as required. Quick to install and featuring cable management, the B1 wall bracket is as exquisite and 'plug-and-play' as LSX itself.
Priced as a PAIR of brackets.

Features:
• 1/4" screw mounting for use with LSX
• Aluminium construction for rigidity and stability
• 40° downward tilt
• 90° sideways speaker positioning in both directions
• Integrated cable management system
• Available finishes: Black / White


Features:
• 1/4" screw mounting for use with LSX
• Aluminium construction for rigidity and stability
• 40° downward tilt
• 90° sideways speaker positioning in both directions
• Integrated cable management system
• Available finishes: Black / White

Customer Reviews
-
They're OKFor the money, I'm disappointed in these. The "instructions" are printed on the box and there is one critical item that seems to be overlooked regarding steps for angling the bracket plate. There are two very tiny screws that seem to govern the plate angle (in addition to the screws on each side of the plate. Furthermore, I installed these on a sloped ceiling and desired to maintain the bottom plate level with the arm. However, the plate slowly began tiling under the weight of the speaker to its maximum of 40 degrees. It required Herculean strength to tighten the screws to maintain their angle and I'm not convinced they will hold. Also there seemed to be defects in two of the Allen fittings. I was afraid I was going to strip the included Allen wrenches. These are fantastic speakers and deserve better.
Posted on
-
great wall mountsYes they are very expensive vs a pair of generic wall mounts. But I could not find a pair of wall mounts that would securely & confidently support these speaker from the base. Given the time I spent searching for alternatives, I finally pulled the plug on these once they were announced. Packaging & instructions are great. The construction is great. Very clean design - the mounts look great and work great. These are fantastic mounts. Specific to these speakers? Well, they are certainly specific to bottom mount speakers, which seem to be rare. So, yeah, they may not work on others. But I love the LSX so they work for me! Highly recommended.
Posted on
Write Your Own Review
Model | B1 Wall Bracket |
Wall Plate Dimensions (H x W) | 169mm x 75mm (6.65in x 2.95in) |
Mounting Arm Depth From Wall | 208.7mm (8.21in) |
Dimensions With Speaker (H x W x D) | 273.2mm x 154.5mm x 262.4mm (10.75in x 6.08in x 10.33in ) |
** KEF reserves the right, in line with continuing research and development, to amend or change specifications. E&OE. **
B1 Wall Bracket Info Sheet | • Open In New Window • Download |